MP10 Boot version V1.01 (2007.05.11)
DRAM Configuration:
Bank #0: 80000000 128 MB
Hit any key to stop autoboot: 0
+yCard_Read_File, destPtr(0x81000000)
+InitializeMmcController
...doMmcIdentificationPhase
Please insert MC card ...
... CMD01 OK
... Card is formatted with FAT16
+f1_aRdOpen 3,
...
ERROR: File Open
... f->filename = MS106143.PKG
... f->filesize = 1779500
... filetime: 2008-12-3, 16:59:14
Reading a file from MMC card... Done
+yCard_Read_File, destPtr(0x81600000)
... f->filename = CS10V115.PKG
... f->filesize = 1399052
... filetime: 2008-12-3, 16:59:12
Reading a file from MMC card... Done
+yCard_Read_File, destPtr(0x82000000)
... f->filename = RD10430K.PKG
... f->filesize = 4430745
... filetime: 2009-6-22, 14:10:26
Reading a file from MMC card... Done
Downloading MSP Image from 0x81000000 ...
code_offset=0x80
code_base=800000
data_offset=1af6e8
code_size=1af668
data_base=9af668
data_size=114
zeroinit_base=9af77c
prog_entry=100
AIFHEADER:
BL_DecompressCode=e1a00000
BL_SelfRelocCode=e1a00000
BL_DbgInitZeroInit=eb00000c
EntryPointOffset=ff800100
ProgramExitInstr=ef000011
ImageReadOnlySize=1af668
ImageReadWriteSize=114
ImageDebugSize=25a0
ImageZeroInitSize=11324
ImageDebugType=23a81
ImageBase=800000
WorkSpace=0
AddressMode=20
DataBase=0
FirstFatOffset=1b1d9c
Reserved2=0
DebugInitInstr=e1a00000
ZeroInitCode[0]=e04ec00f
<setup_memory_tags> bd->sdram_bank : 1
Booting ARM0 (MSP) at 0x00000100 ...
Booting ARM1 (CSP) at 0x81600000 ...
Linux version 2.6.13-rtl (root@os7100) (gcc version 3.3.2) #226 Fri Aug 22 15:11:17 KST 2008
CPU: ARM920Tid(wb) [41129200] revision 0 (ARMv4T)
Machine: ARM-M825xx2 Comcerto
Memory policy: ECC disabled, Data cache writeback
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets
CPU0: D cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets
Built 1 zonelists
Kernel command line: console=ttyS0,38400 root=/dev/ram0 rw initrd=0x82000000,25M ramdisk=81920 ip=10.0.0.10:10.0.0.11:10.0.0.1:255.255.255.0::eth0:off mem=128M
PID hash table entries: 1024 (order: 10, 16384 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 128MB = 128MB total
Memory: 100992KB available (2298K code, 786K data, 104K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 25600K
NET: Registered protocol family 16
Comcerto PCI: init
Comcerto PCI: Comcerto device is not configured in PCI host
Verify that HBMODE_n(low) pin is high and HBBURSTEN_n(high) pin is low
On Mindspeed MH02-D370-xxx board, remove jumper JPCISLV1
SCSI subsystem initialized
SPI core: loaded version 0.2
NetWinder Floating Point Emulator V0.97 (double precision)
devfs: 2004-01-31 Richard Gooch (
rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
yaffs Aug 21 2008 09:03:51 Installing.
Initializing Cryptographic API
Crypto engine S/W registered
Serial: 8250/16550 driver $Revision: 1.4 $ 2 ports, IRQ sharing enabled
Serial: Comcerto 16550 serial driver $Revision: 1.2 $
ttyS0 at MMIO 0x10090000 (irq = 41) is a 16550A
io scheduler noop registered
RAMDISK driver initialized: 1 RAM disks of 81920K size 1024 blocksize
loop: loaded (max 8 devices)
nbd: registered device at major 43
m825xx_ved: version 0.0.2-2.6cvs
m825xx_ved: init SMI
NFTL driver: nftlcore.c $Revision: 1.1.1.1 $, nftlmount.c $Revision: 1.1.1.1 $
comcerto nand: no nand found
SPI core: add adapter comcerto-spi
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 4
IP-Config: Complete:
device=eth0, addr=10.0.0.10, mask=255.255.255.0, gw=10.0.0.1,
host=10.0.0.10, domain=, nis-domain=(none),
bootserver=10.0.0.11, rootserver=10.0.0.11, rootpath=
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
Freeing init memory: 104K
INIT: version 2.84 booting
wdog_app start..........
mmc2ram(loading startup.ini) ...
=====================================================
MMC2RAM Compile Time : 15:20:38, Jul 23 2007
=====================================================
Loading VMS DB files...
MMC ROPEN error.
can not open (/os7100/vm/dta/SITEINFO.TBL). restore incompleted.
MMC ROPEN error.
can not open (/os7100/vm/dta/ACTIVITY.LOG). restore incompleted.
MMC ROPEN error.
can not open (/os7100/vm/dta/ERROR.LOG). restore incompleted.
MMC ROPEN error.
can not open (/os7100/vm/dta/USER.LOG). restore incompleted.
MMC ROPEN error.
can not open (/os7100/vm/dta/SYSTEM.INI). restore incompleted.
MMC ROPEN error.
can not open (/os7100/vm/dta/backup.msg). restore incompleted.
MMC ROPEN error.
can not open (/os7100/vm/dta/backup.pmt). restore incompleted.Loading directory list files...
MMC ROPEN error.
can not open (/os7100/mp/database.mc). restore incompleted.
MMC ROPEN error.
can not open (/startup.ini). restore incompleted.
Loading mbx files...
newpath : /mbx.tar
oldpath : /os7100/vm/mbx/mbx.tar
Tar (mbx.tar) Restoring..........ok
indexing(making mmc.lst) ...
=====================================================
INDEXING Compile Time : 15:20:39, Jul 23 2007
=====================================================
Creating directory index file...
--MmcDirIndex, TE4300_IOCTL_DIR, [1675]
st_mklst(making boot.mmc) ...
No exist startup.ini
pass to write filename(AP10430K.PKG
)
pass to write filename(DR10430K.PKG
)
pass to write filename(WS10430K.PKG
)
pass to write filename(RT10430K.PKG
)
rmhd boot.mmc(loading pkg except header) ...
=====================================================
RMHEADER Compile Time : 15:20:39, Jul 23 2007
=====================================================
Probing EEPROM ...found.
ifconfig eth0 XXX.XXX.XXX.XXX netmask XXX.XXX.XXX.XXX
route add default gw XXX.XXX.XXX.XXX
xinetd start ...
Reading key for server OS7100-MP11:443
Launching... /etc/httpd/conf/gcache
pid=664
INIT: Entering runlevel: 5art: h
[auto_lan] mp_type=10
kernel.msgmni = 128
kernel.msgmnb = 262144
RTCore Operating System (
http://www.fsmlabs.com/) ready: 1 CPU
RTC 72423 Driver
NET: Registered protocol family 27
10.0.0.10 login:
[APIS] DSP MAX Channels = 28
[APIS] MGI MAX Channels = 8
[APIS] VMS MAX Channels = 4
[APIS] SP MAX Channels = 16
[APIS] ACITVE MODE = 3 (0:stand alone, 1:master, 2:slave)
[APIS] MP CARD TYPE = 0x10 (10:MP10, 1a:MP10a, 11:MP11, 30:OS7030, 70:OS7070)
[APIS] This is API Server V2.03 (2009/06/02) (Jun 22 2009 14:06:05)!
[GTL]: pthread_attr_setschedparam OK!(priority = 98
############[GTL DEBUG] bGtlInit value == 1
>>>>> Not Received SUPVSR_READY (KeepGoing=0)
[CMDS]-- mDSP_Init_VP(): IP=918f6d4e, 78.109.143.145
[CMDS]-- Channel Count :28
[CMDS] LocalCmd: Receive SUPVSR_READY OK!(Param1 = 0x0000, Param2 = 0x0000)
>>>>> 1. End of SUPVSR_READY : Success (KeepGoing=1)
>>>>> 2. End of TDM_SELECT_BUS_MODE : Success (KeepGoing=1)
>>>>> 3. End of SUPVSR_TDM_ENABLE_BUS_MODE : Success (KeepGoing=1)
>>>>> 4. End of SUPVSR_SETUP_TDM_PARAMS1 : Success (KeepGoing=1)
>>>>> 5. End of SET_ETH_HDR : Success (KeepGoing=1)
>>>>> 6. End of IP_SERVICE_CFG : Success (KeepGoing=1)
>>>>> 7. End of IP_OPTIONS : Success (KeepGoing=1)
>>>>> 8. End of IP_REDIRECT_OPTIONS_CFG : Success (KeepGoing=1)
[CMDS][mp10||7030||7070] >>>>>> Dual Filter Echo Canceller is enabled (2) <<<<<<
>>>>> 9. End of SPU_FEATURES_CONTROL : Success (KeepGoing=1)
>>>>> 10. End of GET_ARM_CODE_VERSION : Success (KeepGoing=1)
[SERV] Current MSP Version: Test_Bz38950_03_v6_14
>>>>> 11. End of SUPVSR_SET_HEARTBEAT : Success (KeepGoing=1)
[CMDS] RecvCmd: Channel 00 creation OK (ChID = 00)
[CMDS] RecvCmd: Channel 01 creation OK (ChID = 01)
[CMDS] RecvCmd: Channel 02 creation OK (ChID = 02)
[CMDS] RecvCmd: Channel 03 creation OK (ChID = 03)
[CMDS] RecvCmd: Channel 04 creation OK (ChID = 04)
[CMDS] RecvCmd: Channel 05 creation OK (ChID = 05)
[CMDS] RecvCmd: Channel 06 creation OK (ChID = 06)
Driver: 16550
takeover_ports : 2
---------continue
takeover_ports : 2
UART detected at Base Address: D0094000 Fifosize: 16
Registered device /dev/rtl_ttyS0
[CMDS] RecvCmd: Channel 07 creation OK (ChID = 07)
[CMDS] RecvCmd: Channel 08 creation OK (ChID = 08)
[CMDS] RecvCmd: Channel 09 creation OK (ChID = 09)
[CMDS] RecvCmd: Channel 10 creation OK (ChID = 10)
[CMDS] RecvCmd: Channel 11 creation OK (ChID = 11)
[CMDS] RecvCmd: Channel 12 creation OK (ChID = 12)
[CMDS] RecvCmd: Channel 13 creation OK (ChID = 13)
[CMDS] RecvCmd: Channel 14 creation OK (ChID = 14)
[CMDS] RecvCmd: Channel 15 creation OK (ChID = 15)
[CMDS] RecvCmd: Channel 16 creation OK (ChID = 16)
[CMDS] RecvCmd: Channel 17 creation OK (ChID = 17)
[CMDS] RecvCmd: Channel 18 creation OK (ChID = 18)
[CMDS] RecvCmd: Channel 19 creation OK (ChID = 19)
[CMDS] RecvCmd: Channel 20 creation OK (ChID = 20)
modified by pinzero !!!
[CMDS] RecvCmd: Channel 21 creation OK (ChID = 21)
[CMDS] RecvCmd: Channel 22 creation OK (ChID = 22)
[CMDS] RecvCmd: Channel 23 creation OK (ChID = 23)
[CMDS] RecvCmd: Channel 24 creation OK (ChID = 24)
[CMDS] RecvCmd: Channel 25 creation OK (ChID = 25)
[CMDS] RecvCmd: Channel 26 creation OK (ChID = 26)
[CMDS] RecvCmd: Channel 27 creation OK (ChID = 27)
Setup RTCore Watchdog..
>>>>> [28] VoIP Channels are created on Device :0x0
[SERV] run_manager(): Manager MSGQ create OK!
[SERV][manager_daemon]: pthread_attr_setschedparam OK!(priority = 58)
[SERV][MANAGE] manager_daemon(): Start!
[SERV] run_manager(): Start manager_daemon OK!
[APIS] IPC (MGI) Handler is created (key: 0x8001, id: 0x8001)
[APIS] IPC (VMS1) Handler is created (key: 0x8002, id: 0x18003)
[APIS] IPC (SP) Handler is created (key: 0x8003, id: 0x28005)
[APIS] IPC (VMS2) Handler is created (key: 0x8005, id: 0x38007)
[APIS] IPC (VMS3) Handler is created (key: 0x8006, id: 0x48009)
[APIS] IPC (VMS4) Handler is created (key: 0x8007, id: 0x5800b)
Loading DLI device module.
############## ISDN MAIN START ##############
[tCONFIG]'s fifo = /os7100/sys/fifo/bri/config_rx : vSYS_BRI_RXFIFO_FdTbl[0x0] : 11
[tCONFIG]'s fifo = /os7100/sys/fifo/bri/config_tx : vSYS_BRI_TXFIFO_FdTbl[0x0] : 12
[tCALL]'s fifo = /os7100/sys/fifo/bri/call_rx : vSYS_BRI_RXFIFO_FdTbl[0x6] : 13
[tCALL]'s fifo = /os7100/sys/fifo/bri/call_tx : vSYS_BRI_TXFIFO_FdTbl[0x6] : 14
[tBRIMAIN]'s fifo = /os7100/sys/fifo/bri/bri_rx : vSYS_BRI_RXFIFO_FdTbl[0x32] : 15
[tBRIMAIN]'s fifo = /os7100/sys/fifo/bri/bri_rx : vSYS_BRI_TXFIFO_FdTbl[0x32] : 16
[tAFT]'s fifo = /os7100/sys/fifo/bri/aft_rx : vSYS_BRI_RXFIFO_FdTbl[0x43] : 17
[tAFT]'s fifo = /os7100/sys/fifo/bri/aft_tx : vSYS_BRI_TXFIFO_FdTbl[0x43] : 18
[tPSMP_MSG]'s fifo = /os7100/sys/fifo/bri/psmp_msg_rx : vSYS_BRI_RXFIFO_FdTbl[0x80] : 19
[tPSMP_MSG]'s fifo = /os7100/sys/fifo/bri/psmp_msg_tx : vSYS_BRI_TXFIFO_FdTbl[0x80] : 20
[tPSMP_HRTBT]'s fifo = /os7100/sys/fifo/bri/psmp_hrtbt__rx : vSYS_BRI_RXFIFO_FdTbl[0x84] : 21
[tPSMP_HRTBT]'s fifo = /os7100/sys/fifo/bri/psmp_hrtbt_tx :
------------ <<<< OS7100 SP S/W >>>> 02.26 (2009.01.16 10:00) INITIAL START -------------vSYS_BRI_TXFIFO_FdTbl[0x84] : 22
[tPSMP_CLI]'s fifo = /os7100/sys/fifo/bri/psmp_cli_rx : vSYS_BRI_RXFIFO_FdTbl[0x85] : 23
[tPSMP_CLI]'s fifo = /os7100/sys/fifo/bri/psmp_cli_tx : vSYS_BRI_TXFIFO_FdTbl[0x85] : 24
[SYS] PRAL : D9180000, MD : D9300000, ENGINE : D9480000
[SYS] DEVICE OPEN SUCCESS !!
[SYS] 7100 SW PORT & CH MAP INITIALwaiting ..............
<<<< OS7100 APIT S/W >>>> 02.04 (2009.05.18 10:00)
[tAPIT_up_proc] sched_param.sched_priority : 56 [APIT][SP] Open FIFO /os7100/sys/fifo/main/spup_msgq OK!
[APIT][SP] up_proc(): Recv CLIE_START MSG!(header: 7e8f0300 0000)
[tAPIT_down_proc] sched_param.sched_priority : 57 [APIT][SP] Open FIFO /os7100/sys/fifo/main/spdn_msgq OK!
[tAPIT_down_proc] pthread_create success
[tAPIT_up_proc] [CLIE][SP] client_proc(): Recv APIT_OK MSG!(header: 7e8f0301 0000)
pthread_create success [APIT][SP] down_proc(): Send APIT_OK MSG!(header: 7e8f0301 0000)
[tMMCDAEMON]'s fifo = /os7100/sys/fifo/sysos/mmcdaemon_msgq : vSYS_TaskMsg_RX_FdTbl[0x42] : 3
[OAL] DSP MAX Channels = 28
[OAL] MGI MAX Channels = 8
[OAL] VMS MAX Channels = 4
[OAL] SP MAX Channels = 16
[OAL] ACITVE MODE = 3 (0:stand alone, 1:master, 2:slave, 3:null)
[OAL] MP CARD TYPE = 0 (0:MP10, 1:MP11, 2:MP10a, 3:OS7030, 4:OS7070)
[OAL] START_PORT = 0x00 (00:OS7100, 10:OS7030, 6c:OS7070)
[OAL] eth0 IP Address : XXX.XXX.XXX.XXX
[OAL] eth0 Subnet Mask : XXX.XXX.XXX.XXX
[OAL] eth0 MAC Address : 00:16:32:C7:86:27
[CLIE] start_acom_client(): Start API Client for MGI
[CLIE][MGI ][client_proc]: pthread_attr_setschedparam OK!(priority = 51)
[CLIE][MGI ] start_acom_client(): Start client thread OK!
>>>>> Channels created on Device :0x0
[SYS] SP <-> APIS fifo creation OK!
[SYS] ALL CARD RESET START (0x39)
[SYS] ALL CARD & DEVICE RESET END (0xc6)
[SYS] MP10 CARD CPLD VER:05, PCB VER:02
[SYS] MP10 SP DB INITIAL END
[SYS]
ENGINE MFR initial fail!! Result = 0x0f, a = 0x00, b = 0x00, c = 0x00, d = 0x00[SYS]
ENGINE MFR initial fail!! Result = 0x0b, a = 0x8d, b = 0x00, c = 0x85, d = 0x00[SYS]
ENGINE MFR initial fail!! Result = 0x0f, a = 0x8f, b = 0x00, c = 0x05, d = 0x00[SYS] MP10 D-BD INITIAL START
[SYS] LP40 LOC(0) MISC INITIAL END
[SYS] MP10 SYSTEM CODEC: A-LAW
[SYS] OS7100 DTACK MASKED: 0x7f
[SYS] INTERRUPT MASKED: 0xff
[SYS] MP10 D-BD SLOT CARD ID READ
[SYS] MP10 SLOT CARD INITIAL END
[SYS] MP10 DLI QDASL CHIP RESET
[SYS] MP10 POWER CONTROL DB INITIAL
[SYS] MP10 PORT TABLE & DB
[SYS] MP10 MGI CARD TABLE
[SYS] SP_10MSEC_THREAD start
[SYS] SP_50MSEC_THREAD start
[SYS] SP_BASE_THREAD startVM_MGI(1) Version:V2.7.9.4: 2009-06-16-10:00
VM_MGI(2) Version:V2.7.9.4: 2009-06-16-10:00
VM_MGI(3) Version:V2.7.9.4: 2009-06-16-10:00
VM_MGI(4) Version:V2.7.9.4: 2009-06-16-10:00
[STARTUP] <<< STARTUP of OfficeServ 7100 >>> V1.05:2009/02/09
[tSTARTUP] pid = 763
[tSTARTUP]'s fifo = /os7100/sys/fifo/sysos/startup_msgq : vSYS_TaskMsg_RX_FdTbl[0x41] : 3
[tCLISRV] pid = 765
[tCLISRV]'s fifo = /os7100/sys/fifo/sysos/clisrv_msgq : vSYS_TaskMsg_RX_FdTbl[0x48] : 3
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack: Ignoring new-style parameters in presence of obsolete ones
ip_conntrack version 2.1 (8192 buckets, 65536 max) - 224 bytes per conntrack
IP_CONNTRACK control Driver Version 0.2 (C)
MPSDNAT control Driver Version 0.2 (C)
MPSDNAT misc register completion! Ver 0.2 (C)
========================================
| MPS setup is complete. |
========================================
[ISDN-DEV] /os7100/sys/fifo/bri/bri_rx opened successfully with FD = 73
MPS is running
get mapping address success !!
[OS]PRAL_BASE 0x401d5000
mp succes shmget shm_id=163845[MP]shmget() success at mSYS_make_MP_mutex(), mp_mutex_shm_id=196614
vSYS_MP_Semaphore semget successmSYS_setRTCTimetoSYSTime() : 2009/6/22, 1:3:10.
[OS]os_get_country_from_eeprom() = -1
[OS]LICENSE=00
[OS]ЪЪЪЪЪЪЪЪЪЪ
ERROR: /eata could not be opened: No such file or directory
os_check_mmc_sd_exist's return value:-1
ERROR: /eata could not be opened: No such file or directory
os_read_mmc_sd_oemid's return value:-1
===== MP10 Start!!!! =====
<<< OfficeServ 7100, Samsung >>>
System starts at 01:03:10 06/22, 0000 (reason=Power On(0x00))
mp succes shmget shm_id=229383
Before mSYS_create_tasks() ...
Before mSYS_open_txfifo() ...
[tCONFIG]'s SP_RXFIFO = /os7100/sys/fifo/sp/config_rx : vSYS_MP_TXFIFO_FdTbl[0x0] : 33
[tCONFIG]'s SP_TXFIFO = /os7100/sys/fifo/sp/config_tx : vSYS_MP_RXFIFO_FdTbl[0x0] : 34
[tERRH]'s SP_RXFIFO = /os7100/sys/fifo/sp/errh_rx : vSYS_MP_TXFIFO_FdTbl[0x1] : 35
[tERRH]'s SP_TXFIFO = /os7100/sys/fifo/sp/errh_tx : vSYS_MP_RXFIFO_FdTbl[0x1] : 36
[tNP_PER]'s SP_RXFIFO = /os7100/sys/fifo/sp/np_per_rx : vSYS_MP_TXFIFO_FdTbl[0x2] : 37
[tNP_PER]'s SP_TXFIFO = /os7100/sys/fifo/sp/np_per_tx : vSYS_MP_RXFIFO_FdTbl[0x2] : 38
[tDIAG]'s SP_RXFIFO = /os7100/sys/fifo/sp/diag_rx : vSYS_MP_TXFIFO_FdTbl[0x4] : 39
[tDIAG]'s SP_TXFIFO = /os7100/sys/fifo/sp/diag_tx : vSYS_MP_RXFIFO_FdTbl[0x4] : 40
[tSMART]'s SP_RXFIFO = /os7100/sys/fifo/sp/smart_rx : vSYS_MP_TXFIFO_FdTbl[0x5] : 41
[tSMART]'s SP_TXFIFO = /os7100/sys/fifo/sp/smart_tx : vSYS_MP_RXFIFO_FdTbl[0x5] : 42
[tCALL]'s SP_RXFIFO = /os7100/sys/fifo/sp/call_rx : vSYS_MP_TXFIFO_FdTbl[0x6] : 43
[tCALL]'s SP_TXFIFO = /os7100/sys/fifo/sp/call_tx : vSYS_MP_RXFIFO_FdTbl[0x6] : 44
[tH323]'s SP_RXFIFO = /os7100/sys/fifo/sp/h323_rx : vSYS_MP_TXFIFO_FdTbl[0x12] : 45
[tH323]'s SP_TXFIFO = /os7100/sys/fifo/sp/h323_tx : vSYS_MP_RXFIFO_FdTbl[0x12] : 46
[tSIP]'s SP_RXFIFO = /os7100/sys/fifo/sp/sip_rx : vSYS_MP_TXFIFO_FdTbl[0x13] : 47
[tSIP]'s SP_TXFIFO = /os7100/sys/fifo/sp/sip_tx : vSYS_MP_RXFIFO_FdTbl[0x13] : 48
[tAFT]'s SP_RXFIFO = /os7100/sys/fifo/sp/aft_rx : vSYS_MP_TXFIFO_FdTbl[0x43] : 49
[tAFT]'s SP_TXFIFO = /os7100/sys/fifo/sp/aft_tx : vSYS_MP_RXFIFO_FdTbl[0x43] : 50
[tCONFIG]'s BRI_RXFIFO = /os7100/sys/fifo/bri/config_rx : vSYS_MPtoBRI_TXFIFO_FdTbl[0x0] : 51
[tCONFIG]'s BRI_TXFIFO = /os7100/sys/fifo/bri/config_tx : vSYS_MPfromBRI_RXFIFO_FdTbl[0x0] : 52
[tCALL]'s BRI_RXFIFO = /os7100/sys/fifo/bri/call_rx : vSYS_MPtoBRI_TXFIFO_FdTbl[0x6] : 53
[tCALL]'s BRI_TXFIFO = /os7100/sys/fifo/bri/call_tx : vSYS_MPfromBRI_RXFIFO_FdTbl[0x6] : 54
[tBRIMAIN]'s BRI_RXFIFO = /os7100/sys/fifo/bri/bri_rx : vSYS_MPtoBRI_TXFIFO_FdTbl[0x32] : 55
[tBRIMAIN] BRI_TXFIFO open error at osstart : 10330480
[tAFT]'s BRI_RXFIFO = /os7100/sys/fifo/bri/aft_rx : vSYS_MPtoBRI_TXFIFO_FdTbl[0x43] : 56
[tAFT]'s BRI_TXFIFO = /os7100/sys/fifo/bri/aft_tx : vSYS_MPfromBRI_RXFIFO_FdTbl[0x43] : 57
[tAFT]txfifo not open at osstart
[tSGLC_RXMSG]txfifo not open at osstart
[tSGLC_TXMSG]txfifo not open at osstart
[tSGLC_RXSOCKET]txfifo not open at osstart
[tSGLC_TXSOCKET]txfifo not open at osstart
[tSGLC_CONNECT]txfifo not open at osstart
[tSGLC_LINKTEST]txfifo not open at osstart
[tSGLC_TEST]txfifo not open at osstart
[tDATAMAIN]txfifo not open at osstart
[tDATA_DSMI]txfifo not open at osstart
[tDATA_AFT]txfifo not open at osstart
[tPSMP_MSG]txfifo not open at osstart
[tPSMP_FILE]txfifo not open at osstart
[tPSMP_TLNT]txfifo not open at osstart
[tPSMP_SIO]txfifo not open at osstart
[tPSMP_HRTBT]txfifo not open at osstart
[tPSMP_CLI]txfifo not open at osstart
Before mSYS_start_tasks() ...
semget: No such file or directory
semget: No such file or directory
[tAFT]semget at osstart
semget: No such file or directory
[tSGLC_RXMSG]semget at osstart
semget: No such file or directory
[tSGLC_TXMSG]semget at osstart
semget: No such file or directory
[tSGLC_RXSOCKET]semget at osstart
semget: No such file or directory
[tSGLC_TXSOCKET]semget at osstart
semget: No such file or directory
[tSGLC_CONNECT]semget at osstart
semget: No such file or directory
[tSGLC_LINKTEST]semget at osstart
semget: No such file or directory
[tSGLC_TEST]semget at osstart
semget: No such file or directory
[tDATAMAIN]semget at osstart
semget: No such file or directory
[tDATA_DSMI]semget at osstart
semget: No such file or directory
[tDATA_AFT]semget at osstart
semget: No such file or directory
[tPSMP_MSG]semget at osstart
semget: No such file or directory
[tPSMP_FILE]semget at osstart
semget: No such file or directory
[tPSMP_TLNT]semget at osstart
semget: No such file or directory
[tPSMP_SIO]semget at osstart
semget: No such file or directory
[tPSMP_HRTBT]semget at osstart
[tPSMP_CLI]semget at osstart
[tVTIMER] task start!!
[CFG] Cfg Task wait Media Task Start
[tCONFIG]start...
[tERRH]start...
[tNP_PER]start...
[tDIAG]start...
[tSMART]start...
[tCALL]start...
[tP_PER]start...
[tSMDR]start...
[tTMMC]start...
[tHMMC]start...
[tDBSAVE]start...
[tSIO]start...
[tLAN]start...
[tIPP]start...
[tINET]start...
[tH323]start...
[tSIP]start...
[tWSG]start...
[tPDHCP]start...
[tFPP]start...
[tLM]start...
[tFPPD]start...
[tPRINT]start...
[tHELLO]start...
[MPS] debug - Call os_open_txfifo()
[tMGIMAIN]start...
[tMPS]start...
[tSTARTUP]start...
[tMMCDAEMON]start...
[tAFT]semop pass(1st unlock_op) at osstart
[tINSTALL]start...
[tOFFICE_LINK]start...
[tCLISRV]start...
[tSGLC_RXMSG]semop pass(1st unlock_op) at osstart
[tSGLC_TXMSG]semop pass(1st unlock_op) at osstart
[tSGLC_RXSOCKET]semop pass(1st unlock_op) at osstart
[tSGLC_TXSOCKET]semop pass(1st unlock_op) at osstart
[tSGLC_CONNECT]semop pass(1st unlock_op) at osstart
[tSGLC_LINKTEST]semop pass(1st unlock_op) at osstart
[tSGLC_TEST]semop pass(1st unlock_op) at osstart
[tVMSMAIN]start...
[tVMSMGI_PORT1]start...
[tVMSMGI_PORT2]start...
[tVMSMGI_PORT3]start...
[tVMSMGI_PORT4]start...
[tDATAMAIN]semop pass(1st unlock_op) at osstart
[tDATA_DSMI]semop pass(1st unlock_op) at osstart
[tDATA_AFT]semop pass(1st unlock_op) at osstart
[tPSMP_MSG]semop pass(1st unlock_op) at osstart
[tPSMP_FILE]semop pass(1st unlock_op) at osstart
[tPSMP_TLNT]semop pass(1st unlock_op) at osstart
[tPSMP_SIO]semop pass(1st unlock_op) at osstart
[tPSMP_HRTBT]semop pass(1st unlock_op) at osstart
[tPSMP_CLI]semop pass(1st unlock_op) at osstart
Before main_wait() ...
[tSTARTUP] semget success at os_common. semid = 262152
succes shmget shmid_os_common=229383
[tAFT] txfifo open error at os_common: -1
[tSGNET: Registered protocol family 10
LC_RXMSG] txfifoDisabled Privacy Extensions on device c02a95b0(lo)
open error at oIPv6 over IPv4 tunneling driver
s_common: -1
[tSGLC_TXMSG] txfifo open error at os_common: -1
[tSGLC_RXSOCKET] txfifo open error at os_common: -1
[tSGLC_TXSOCKET] txfifo open error at os_common: -1
[tSGLC_CONNECT] txfifo open error at os_common: -1
[tSGLC_LINKTEST] txfifo open error at os_common: -1
[tSGLC_TEST] txfifo open error at os_common: -1
[tDATAMAIN] txfifo open error at os_common: -1
[tDATA_DSMI] txfifo open error at os_common: -1
[tMMCDAEMON] semget success at os_common. semid = 32769
[tMMCDAEMON]my_print_falg = 80701012
succes shmget shmid_os_common=229383
[tSPMAIN] txfifo open error at os_common: -1
[tBRIMAIN] txfifo open error at os_common: -1
[tAFT] txfifo open error at os_common: -1
[tDATAMAIN] txfifo open error at os_common: -1
[tDATA_DSMI] txfifo open error at os_common: -1
[MAIN] IP Address : XXX.XXX.XXX.XXX
[MAIN] Subnet Mask : 255.255.255.248
[MAIN] MAC Address : 00:16:32:C7:86:27
>>>>> Channels created on Device :0x0
[MAIN] IP Address : XXX.XXX.XXX.XXX
[MAIN] Subnet Mask : XXX.XXX.XXX.XXX
[MAIN] MAC Address : 00:16:32:C7:86:27
>>>>> Channels created on Device :0x0
[MAIN] IP Address : XXX.XXX.XXX.XXX
[MAIN] Subnet Mask : XXX.XXX.XXX.XXX
[MAIN] MAC Address : 00:16:32:C7:86:27
>>>>> Channels created on Device :0x0
[tCLISRV] semget success at os_common. semid = 294921
[tCLISRV]my_print_falg = 0000000e
[tCLISRV]'s SP_RXFIFO = /os7100/sys/fifo/sp/clisrv_rx : vSYS_MP_TXFIFO_FdTbl[0x48] : 5
[tCLISRV]'s SP_TXFIFO = /os7100/sys/fifo/sp/clisrv_tx : vSYS_MP_RXFIFO_FdTbl[0x48] : 6
succes shmget shmid_os_common=229383
[tAFT] txfifo open error at os_common: -1
[tSGLC_RXMSG] txfifo open error at os_common: -1
[tSGLC_TXMSG] txfifo open error at os_common: -1
[tSGLC_RXSOCKET] txfifo open error at os_common: -1
[tSGLC_TXSOCKET] txfifo open error at os_common: -1
[tSGLC_CONNECT] txfifo open error at os_common: -1
[tSGLC_LINKTEST] txfifo open error at os_common: -1
[tSGLC_TEST] txfifo open error at os_common: -1
[tDATAMAIN] txfifo open error at os_common: -1
[tDATA_DSMI] txfifo open error at os_common: -1
=> [VM] System startup. Version 2.7.9.4 06-16-2009 10:00.00
================================================
Start VoIP Part...
Create VoIP Msg Queue...
[MAIN] IP Address : XXX.XXX.XXX.XXX
[MAIN] Subnet Mask : XXX.XXX.XXX.XXX
[MAIN] MAC Address : 00:16:32:C7:86:27
>>>>> Channels created on Device :0x0
[tDATA_AFT] txfifo open error at os_common: -1
Valid OEM ID
[VOIP] QUEUE(DSPQ) create OK !
[tDATA_AFT] txfifo open error at os_common: -1No exist startup.ini
>>>>> Channels created on Device :0x0
[VOIP] QUEUE(IPCR) create OK !
>>>>> Channels created on Device :0x0
>>>>> Channels created on Device :0x0
>>>>> Channels created on Device :0x0
[VOIP] QUEUE(IPCW) create OK !
[VOIP] QUEUE(CFGQ) create OK !
=>NOTICE - Block table /os7100/vm/dta/BLOCK.TBL successfully loaded
=>NOTICE - Total voice ports available: 4
=> 0) Status Process Starting
=> 0) CLI Process Starting
[VOIP] QUEUE(LOGQ) create OK !
=> 0) Maintenance starting
=>TST 1:03.14.88 0) Maintenance expected Time:7006
=> 0) Voice port 1 starting
=> 1) Changing to MODE: 1 AUTO
=> 0) Voice port 2 starting
=> 2) Changing to MODE: 1 AUTO
=> 0) Voice port 3 starting
=> 3) Changing to MODE: 1 AUTO
=> 0) Voice port 4 starting
=> 4) Changing to MODE: 1 AUTO
=> 0) Web Process Starting
[VOIP] QUEUE(CLI) create OK !
=> 0) SMTP Manager starting
=> 0) Smtp process starting
=> 0) SmtpClient process starting
=> 0) IPC process starting
=>CP 1:03.14.91 0) Trunk table loaded
=> 0) MWI Service starting
[VOIP] Queue(ch_no = 00) create OK !
[VOIP] Queue(ch_no = 01) create OK !
[VOIP] Queue(ch_no = 02) create OK !
[VOIP] Queue(ch_no = 03) create OK !
[VOIP] Queue(ch_no = 04) create OK !
[VOIP] Queue(ch_no = 05) create OK !
[VOIP] Queue(ch_no = 06) create OK !
[VOIP] Queue(ch_no = 07) create OK !
[VOIP][IPC_read]: pthread_attr_setschedparam OK!(priority = 47
[VOIP] IPC read thread creation OK!
[CFG] Cfg Task Initial Start
[CFG] Cfg Database Check Start
[CFG] BD_7000MP_ID (68)
[DBS] Restored System DB from SRAM (before address mapping)
[DBS] Copy System DB from SRAM
[DBS] Restored System DB from SRAM
[CFG] Database Memory Recovered from Backup Memory
[CFG] Cfg Database Check End
DIPSW:f6
[CFG] Cfg Task Initial End
[VOIP][IPC_write]: pthread_attr_setschedparam OK!(priority = 47)
[VOIP] IPC write thread creation OK!
[CFG] Database Memory Saved to Memory Device
[INIT] CFG Online!!
[VOIP][CFG_main]: pthread_attr_setschedparam OK!(priority = 49)
[VOIP] CONFIG thread creation OK!
[SYS] SEND SP(0) Status ack message ![CFG]CARD ACTIVE : card_con_srv_sub(lpno=0, slot=1, card=0xff)
[SYS] MP10 SYSTEM CODEC: A-LAW
[SYS] COUNTRY[06] : RUSSIA to_port_para_16trk2gain msg_ptr->head.lpm_port : 40
[CFG] Config Task initial end...
debug - user_sipmain_task(142)
[VOIP] Waiting for card start messages from MCP...
[CFG_START] Send a CARD_START message to MP!
=> 0) IPC process started
=>ERROR - Not available Operator extension block
=> Eclass block gp:1, label:No Messaging 's outcall is enabled
=> Eclass block gp:1, label:Standard 's outcall is enabled
=> Eclass block gp:1, label:TEMPLATE ECL 's outcall is enabled
=> Mclass block gp:1, label:Standard 's outcall is enabled
=> Mclass block gp:1, label:TEMPLATE MCL 's outcall is enabled
=> Eclass block gp:2, label:Standard ECL 's outcall is enabled
=> Eclass block gp:2, label:TEMPLATE ECL 's outcall is enabled
=> Mclass block gp:2, label:Standard MCL 's outcall is enabled
=> Mclass block gp:2, label:TEMPLATE MCL 's outcall is enabled
[IPCR] IPC_rxmsg_proc(): MGI_CARD_PARA Recieved & Proccess!
[IPCR] MCP -> MGI: MGI_CARD_PARA mesage!
[CFG] CFG_db_download(): IPv4_PARAM_DB downloading!
