AP SMT-R2000 v2.10
Добавлено: 11 янв 2009, 23:46New Version Changes
’08.4.9 V2.09.00
(1) S/W changed items
- kernel
- device-mgmt-agent
- ds-init
(2) Modification
- Change file system type ( JFSS2 → Squashfs)
To reduce flash fail
- Change Flash Write Method. (buffered write → word write).
To reduce flash fail,
- Config area dualization.
To solve problem changed to Default when occurring Power on/off at Writing Flash's Config area
- If SMT–R2000 setted 802.11a disable, Periodic WLAN chip Reset exclusion.
- For improvement in interference environment,
Add console command ( Weak Signal Detect Setting)
set bss all ofdmweaksigdet 1 or 0 ( 1: enable , 0:disable)
set bss all ani_enable 1 or 0 ( 1: enable , 0:disable)
(3) Caution
Before upgrade V2.10.00 s/w, you confirm version V2.09 or V2.08
If the other Version(v1.00~V2.07) upgrade, Configuration is changed default
Upgraded process
V1.00 ~ V2.07 -> Upgrader080119.upgrade.tar -> V2.08~V2.09 -> V2.10
V1.00 ~ V2.07 -> V2.10 : Configuration is changed default