Проблема с прошивкой загрузчика OS7200

[Shikoff]

Такая ситуация - пытаюсь прошить загрузчик - беру кабель от Cisco, втыкаю в SIO порт платы MCP. В Tera Term выставляю всё по инструкции. Ресет АТС - в терминальной сессии на нажатие ENTER не реагирует совсем, продолжает грузится.

[LionB]

Да все нормально вводится.. Вот только-что попробовал


[Boot PGM] <<< Boot Program of OfficeServ 500/7200 System >>> V1.07:2007/05/08

cpld = 02, bit_flag = 0000
cpld = 02, bit_flag = 0000
cpld = 02, bit_flag = 0000
[Boot PGM] This board is for SmartMedia memory card.



[Boot PGM] To be display '#' mark every 128K byte loading to DRAM

|1%

####[O.K]
[Boot PGM] load file Check sum is O.K, Origin CheckSum:1873, loaded CheckSum:1873, file size:323472 byte

[Boot PGM] Success to the loading to DRAM
[Boot PGM] Now start Startup Program of OfficeServ500/7200 System



[Startup PGM] <<< Startup Program of OfficeServ 500/7200 System >>> V1.08:2007/05/08
cpld = 02, bit_flag = 0000
cpld = 02, bit_flag = 0000
cpld = 02, bit_flag = 0000
[Startup PGM] This board is for SmartMedia memory card.


[Startup PGM] Success to the getting mcp file(MPPS414K.ZPG), try to loading to DRAM
[Startup PGM] Because mcp file(MPPS414K.ZPG) is zip file, need to decompress after loading !


[Startup PGM] To be display '#' mark every 128K byte loading to DRAM

|1%

Вот тут несколько раз нажаш Enter

##[Startup PGM]!Sorry, invalid password...
[Startup PGM]!Sorry, invalid password...
[Startup PGM]!Sorry, invalid password...
[Startup PGM]!Sorry, invalid password...
#[Startup PGM]!Sorry, invalid password...
##  #####[Startup PGM]!Sorry, invalid password...
#####


Вот тут ввел os500samsung

**********************************************************************************

* OfficeServ 500 Consol command help ... IAD Development Group *
* [Version: V1.08:2007/05/08] *

*--------------------------------------------------------------------------------*

* HELP ... OfficeServ 500 help command *

* DIR ... File list in NAND Flash Memory *

* READIP ... Network parameter infomation display(IP,MAC ...) *

* WRITEIP ... Network parameter write(IP addr + Auto setting) *

* ex) WRITEIP 160.217.70.9 *

* WRITEIP2 ... Network parameter write(IP addr + Gateway addr + subnet mask) *

* ex) WRITEIP2 160.217.70.9 160.217.70.1 255.255.255.0 *

* MACR ... MAC address read *

* REMOTE ... Make to start AFT program *

* CHGBOOT ... Update Boot program(boot file name is btos500.pgm) *

* *

**********************************************************************************



[Startup PGM] System Network Configuration
- IP : 10.0.2.2
- GW : 10.0.2.1
- SM : 255.255.255.0
- MAC: 0000F03A6154


[Startup PGM] STOP the load to DRAM by Consol command

[Startup PGM] OffiecServ500/7200 System, Enter password !

Вот тут ввел help

**********************************************************************************

* OfficeServ 500 Consol command help ... IAD Development Group *
* [Version: V1.08:2007/05/08] *

*--------------------------------------------------------------------------------*

* HELP ... OfficeServ 500 help command *

* DIR ... File list in NAND Flash Memory *

* READIP ... Network parameter infomation display(IP,MAC ...) *

* WRITEIP ... Network parameter write(IP addr + Auto setting) *

* ex) WRITEIP 160.217.70.9 *

* WRITEIP2 ... Network parameter write(IP addr + Gateway addr + subnet mask) *

* ex) WRITEIP2 160.217.70.9 160.217.70.1 255.255.255.0 *

* MACR ... MAC address read *

* REMOTE ... Make to start AFT program *

* CHGBOOT ... Update Boot program(boot file name is btos500.pgm) *

* *

**********************************************************************************

[Shikoff]

А у меня всё так происходит....


[Boot PGM] <<< Boot Program of OfficeServ 500/7200 System >>> V1.05:2004/06/16

Здесь пытаюсь нажать ENTER - хоть один хоть много раз тщетно, и через несколько секунд.


<<< iDCS500 Premium-M, Samsung >>>
[40h] System starts at 09:58:18 04/15, 1990 (reason=S/W)

[SYS]vSYS_HWRstReason[addr:0x08500000] = 0xfff2

[SYS] Initialize OS...
LTX972 PHY INIT : PASS

[SYS] System Network Configuration
- MAC: SamsungE82442
- IP : 192.168.0.151
- GW : 192.168.0.223
- SM : 255.255.255.0
[SYS] Network Configuration is OK
[SYS] tVTMR Task created
[SYS] tCNFG Task created
[SYS] tERRH Task created
[SYS] tNPER Task created
[SYS] tUPRT Task created
[SYS] tDIAG Task created
[SYS] tSMAT Task created
[SYS] tCALL Task created
[SYS] tPPER Task created
[SYS] tSMDR Task created
[SYS] tTMMC Task created
[SYS] tHMMC Task created
[SYS] tHEL Task created
[SYS] tLAN Task created
[SYS] tIPP Task created
[SYS] tINET Task created
[SYS] tH323 Task created
[SYS] tSIP Task created
[SYS] tNOTA Task created
[SYS] tTeln Task created
[SYS] tDTMF Task created
[SYS] tIPC Task created
[SYS] tSPMA Task created
[SYS] tSP10 Task created
[SYS] tSP50 Task created
[SYS] tRDY Task created
[SYS] tWSG Task created
[SYS] tDHCP Task created
[SYS] tFPP Task created
[SYS] tLME Task created
[SYS] tWSIP Task created
[SYS] tCHCP Task created
[SYS] tWPA Task created
[SYS] tWLI Task created
[SYS] tLMD Task created
[SYS] tTEL Task created
[SYS] tMON Task created
[SYS] tPRN Task created
[SYS] tVTMR Task starts (taskid=1e)...
[SYS] Message Queue created (taskid=1e)...
[SYS] tDTMF Task starts (taskid=19)...
[SYS] tCNFG Task starts (taskid=0)...
[SYS] Message Queue created (taskid=00)...
[CFG] Cfg Task Start
[CFG] Cfg Database Check Start
[CFG] Database Memory Recovered from SRAM
[CFG] Cfg Database Check End
[CFG] Cfg Task Initial End
[SYS] tIPC Task starts (taskid=1a)...
[SYS] Message Queue created (taskid=1a)...
[IPC]-- Start IPC_TASK Initial...
[IPC]-- hdlc_debug_print_flag(2byte) address is 0x20009ac
[IPC]-- hdlc_debug_print_flag2(2byte) address is 0x20009ae
[IPC]-- Completed IPC Initial...
[SYS] tSPMA Task starts (taskid=1b)...
[SYS] Message Queue created (taskid=1b)...
[SYS] tSP10 Task starts (taskid=1c)...
[SYS] tSP50 Task starts (taskid=1d)...
[SYS] tERRH Task starts (taskid=1)...
[SYS] Message Queue created (taskid=01)...
[SYS] tCALL Task starts (taskid=6)...
[SYS] Message Queue created (taskid=06)...
[SYS] tINET Task starts (taskid=11)...
[SYS] Message Queue created (taskid=11)...
[SYS] tNPER Task starts (taskid=2)...
[SYS] Message Queue created (taskid=02)...
[SYS] tHEL Task starts (taskid=d)...
[SYS] Message Queue created (taskid=0d)...
[SYS] tPPER Task starts (taskid=7)...
[SYS] Message Queue created (taskid=07)...
[SYS] tSMDR Task starts (taskid=8)...
[SYS] Message Queue created (taskid=08)...
[SYS] tLAN Task starts (taskid=e)...
[SYS] Message Queue created (taskid=0e)...
[SYS] tUPRT Task starts (taskid=3)...
[SYS] tWSG Task starts (taskid=20)...
[SYS] Message Queue created (taskid=20)...
[SYS] tDIAG Task starts (taskid=4)...
[SYS] Message Queue created (taskid=04)...
[SYS] tSMAT Task starts (taskid=5)...
[SYS] Message Queue created (taskid=05)...
[SYS] tIPP Task starts (taskid=10)...
[SYS] Message Queue created (taskid=10)...
[SYS] tH323 Task starts (taskid=12)...
[SYS] Message Queue created (taskid=12)...
[SYS] tSIP Task starts (taskid=13)...
[SYS] Message Queue created (taskid=13)...
[SYS] tFPP Task starts (taskid=22)...
[SYS] Message Queue created (taskid=22)...
[SYS] tLME Task starts (taskid=23)...
[SYS] Message Queue created (taskid=23)...
[SYS] tDHCP Task starts (taskid=21)...
[SYS] Message Queue created (taskid=21)...
[SYS] tTeln Task starts (taskid=18)...
[SYS] tPRN Task starts (taskid=2b)...
[SYS] Message Queue created (taskid=2b)...
[SYS] tTMMC Task starts (taskid=9)...
[SYS] Message Queue created (taskid=09)...
[SYS] tHMMC Task starts (taskid=b)...
[SYS] Message Queue created (taskid=0b)...
[SYS] tNOTA Task starts (taskid=17)...
[SYS] tNOTA Task blocked (taskid=17)...
[SYS] tWSIP Task starts (taskid=24)...
[SYS] tWSIP Task blocked (taskid=24)...
[SYS] tCHCP Task starts (taskid=25)...
[SYS] tCHCP Task blocked (taskid=25)...
[SYS] tWPA Task starts (taskid=26)...
[SYS] tWPA Task blocked (taskid=26)...
[SYS] tWLI Task starts (taskid=27)...
[SYS] tWLI Task blocked (taskid=27)...

[SYS] System is ready to service...

[SYS] tLMD Task starts (taskid=28)...
[SYS] tLMD Task blocked (taskid=28)...
[SYS] tTEL Task starts (taskid=29)...
[SYS] tMON Task starts (taskid=2a)...
[SYS] tMON Task blocked (taskid=2a)...

[LionB]

Это рано... Boot PGM должен отработать..

Надо давить, когда начнет работать Startup PGM

[Startup PGM] <<< Startup Program of OfficeServ 500/7200 System >>> V1.08:2007/05/08

[Shikoff]

В том то и дело, что у меня эта строчка даже не возникает в терминале.... и после BOOT PGM идёт всё так, как написано выше...

[LionB]

А Sturtup PGM вообще на флэшке есть? (Моя 7200 меняла boot несколько раз, начиная с v1.01). У вас 1.05
И еще... Перегружать MCP для отработки boot и startup надо либо питанием, либо кнопкой reset на MCP. Но не по MMC811 (это быстрый restart без reboot)

[Shikoff]

Перегружаю кнопкой ресет на MCP. На флешке через OfficeServ Manager вижу следующие файлы

LPPSV261.PGM
MPPSV261.PGM
STARTUP.INI
STARTUP.PRE
И сам туда дописал BTOS500.PGM... как в инструкции, правда не менял STARTUP.PRE, идущий в архиве с BTOS500.PGM.

[LionB]

Дык все понятно... Версия еще не понимающая ZPG расширения прошивки MCP главного процессора.. Собственно sturtup.pre для этого и меняется (в нем встроен разархиватор ZPG в PGM). Все прошивки MCP, начиная с 2.63 и выше уже идут в формате ZPG (зазипованные). При загрузке соответственно меню выглядит совсем по другому. Вот и результат..

[Shikoff]

Ок буду менять STARTUP.PRE, просто не менял потому что боялся в случае неудачной прошивки не сделать откат системы... Правда настройки сохранил через OfficeServ последней версии и только на них уповаю)) Спасибо большое пойду ломать дальше))

[LionB]

Ставь сразу 4.14k и далее сможешь и OSM и Installation Tool использовать..